File of notes

Blog

  1. 18

    Field notes: the bridge that always runs long on paydays

    A planner's field notes on why one border crossing reliably backs up on paydays, and what the pattern reveals about measuring queue length instead of wait time.

  2. 17

    How to tell a fog delay from an inspection bottleneck in a border queue image

    How to tell a weather-driven border queue from a capacity-driven one using queue shape, timing, and conditions data in satellite imagery.

  3. 16

    Sizing satellite tasking cadence around a seasonal produce rush at the border

    How to set VHR pass frequency for a seasonal produce surge at a border crossing without over-ordering imagery or missing the backup.

  4. 15

    What a trusted trader lane does to your queue length reading

    FAST and C-TPAT lanes split one line into two queues. Here's what that means for how you read queue length at a crossing.

  5. 14

    Field notes: the Friday before a holiday weekend when the queue didn't move

    A planner's account of a pre-holiday border backup, the dead radio silence past the last camera, and what that stretch of road was doing.

  6. 13

    What a secondary inspection bay does to your queue length reading

    Secondary inspection vehicles sit apart from the main line but still belong in your queue count. Here's how to read them in an image.

  7. 12

    How to convert a satellite queue length reading into an estimated wait time

    Turning a queue length reading from imagery into a wait time estimate needs vehicle spacing and a processing rate. Here's the math.

  8. 11

    What is a numbered briefing note in queue monitoring?

    What a numbered briefing note is in customs queue monitoring, what goes in it, and why the reference number matters for handover and audit trail.

  9. 10

    Field notes: the morning the harvest trucks backed up past the weigh station

    A field-notes look at the seasonal surge that backs produce trucks past the weigh station, and why eyeballing the line isn't enough.

  10. 09

    How many lanes does it take to clear a mile of truck queue?

    A planner's napkin math: vehicles per mile of queue, booth throughput by lane type, and why the clearance-rate question starts with a trustworthy queue number.

  11. 08

    FAST lane vs general lane: why queue length behaves differently at the border

    How trusted trader lanes and general commercial lanes build and clear backups differently, and why that matters for queue tracking.

  12. 07

    What queue spillback means for gate planning

    Queue spillback past the plaza onto public roads changes who you answer to. Here's what it is and why gate planners track it.

  13. 06

    How many truck lengths equal a kilometer of queue?

    Converting a reported queue length into a truck count, with the spacing assumptions that change the number.

  14. 05

    What counts as a queue versus normal traffic at a border crossing

    A practical line between normal traffic flow and an actual queue at a land border crossing, and how planners set the threshold.

  15. 04

    How to estimate truck queue length from satellite imagery

    A working method for reading truck backup length off overhead imagery when there's no sensor at the gate, from resolution to the actual count.

  16. 03

    Loaded queue or shoulder parking? Reading vehicle spacing in satellite imagery

    How to separate a real queue backing up from a gate from trucks staged on the shoulder, using spacing and position cues in VHR imagery.

  17. 02

    Satellite imagery vs roadside cameras for border crossing queues

    CCTV covers the gate, not the tailback. Here's where fixed cameras run out and a VHR satellite pass picks up queue extent instead.

  18. 01

    Queue length vs. dwell time at a border crossing: what's the difference?

    Queue length and dwell time measure different things at a crossing. Here's how planners tell them apart and why it matters for staffing calls.

← Back to Queue Length Monitor